Rubicon Express Long Arm "LOWERED PRICE" (w/PICS)

[GOT ROCKS]

This kit is for an XJ or a ZJ.

NEW PRICE

$1,800.00  OBO



NEW PRICE

$1,800.00  OBO

YOU ARE LOOKING AT A CUSTOM "RUBICON EXPRESS" EXTREME DUTY LONG ARM LIFT KIT w/SHOCKS.

(This kit has been taken apart and was re-powder coated to manufacturer specs.  Almost all of the bushings were replaced with new ones from Rubicon Express, and all of the joints were greased and re-assembled along with new grease fittings.  The Cross member has been Rhino Lined.  The shocks have been repainted and received new shock boots & stickers from Rubicon Express. You will need to get your own shock hardware found at your local hardware store.)

THIS IS A CUSTOM LIFT KIT FOR EITHER A JEEP CHEROKEE XJ ('87 TO '96) OR A JEEP GRAND CHEROKEE ZJ ('93 TO '98).

(This means you will need welding skills or rely on the help of a professional welder to install this lift kit to your application.  Most of it is bolt-on, but there will be some welding required to completely install this kit.  Most of the hardware needed is supplied, however you are missing some of the bolts & brackets required depending on your application, and you will need to supply them yourself.  The hardware is available at any hardware store and is inexpensive.  The brackets will need to be fabricated or can be purchased from http://www.rubiconexpress.com)

PART #'s OF WHAT IS INCLUDED IN THIS LIFT KIT ARE AS FOLLOWS:
•   RE9920 - CROSSMEMBER FOR XJ EXTREME DUTY LONG ARM LIFT KIT (welding required to make it fit ZJ)
•   CROSS MEMBER KIT INCLUDES THE FOLLOWING:
•   RM21710  -XJLA CROSS MEMBER SKID PLATE
•   RM21720 - XJLA LEFT CONTROL ARM MOUNT (FRONT)
•   RM21730 - XJLA RIGHT CONTROL ARM MOUNT (FRONT)
•   RM21740 - XJLA SIDE BRACE PEM STRIP
•   RM21750 - XJLA C/A MOUNT PEM STRIP 2PEMS
•   RM21760 - XJLA C/A MOUNT SIDE BRACE L/R
•   RM21770 - XJLA C/A MOUNT NUT STRIP
•   RM21780 - XJLA TRANS ADAPTER BRACKET
•   FRONT LIFT KIT INCLUDES THE FOLLOWING:
•   RE4000 - EXTREME DUTY CONTROL ARM FRONT LOWER LEFT
•   RE4010 - EXTREME DUTY CONTROL ARM FRONT LOWER RIGHT
•   RE4020 - EXTREME DUTY CONTROL ARMS FRONT UPPERS
•   RE1358 - 7.5" XJ/ZJ FRONT LIFT COILS
•   RXJ603 - FRONT SHOCKS
•   RE1141 - GENERATION 2 SWAY BAR DISCONNECTS
•   RE1660 - TRACK BAR XJ/ZJ EXTREME DUTY
•   RE1665 - TRACK BAR RELOCATION BRACKET XJ/ZJ HEAVY DUTY
•   RE1383 - BUMP STOPS (FRONT LOWER)
•   REAR LIFT KIT INCLUDES THE FOLLOWING: (you will need to fabricate rear brackets or purchase them from http://www.rubiconexpress.com)
•   RE4030 - EXTREME DUTY CONTROL ARMS REAR LOWERS
•   RE4040 - EXTREME DUTY CONTROL ARMS REAR UPPERS
•   RE1359 - 7.5" XJ/ZJ REAR LIFT COILS
•   RXJ507 - REAR SHOCKS

WITH THIS LIFT KIT YOU CAN ACHIEVE 5.5" TO 7.5" OF LIFT AND FIT 33"X12.50" TIRES WITH OUT CUTTING.  IF YOU TRIM THE FENDERS ACCORDINGLY YOU CAN FIT 35"X14.50" TIRES COMFORTABLY.

THIS KIT IS AN EXTREME OFF-ROAD ROCK CRAWLING KIT, WITH OUT SACRIFICING THE COMFORTABLE RIDE EXPECTED WHEN YOU ARE ON THE ROAD.

(You will need brake line extenders front and rear, maybe a drop pitman arm, new front and rear drive shafts, maybe an S.Y.E. (Slip Yoke Eliminator), and/ or any other components that normally come with these kits from http://www.rubiconexpress.com but aren't listed above.  This is a fully functional lift kit with professional guidance.  Instructions for this kit can be found on the afore mentioned web site.  You may need to alter your exhaust system to fit this kit.)

"Picture reflects actual lift kit and it's components for this listing."

Prefer local pick up, but willing to ship.  Buyer will pay all shipping & handling costs.  Flat rate to the lower 48 states of the United States at $115.00 USD.

ITEM IS SOLD "AS-IS".  NO WARRANTY, RETURN OR REFUND.

YOU WILL NOT FIND THIS LIFT KIT AND ALL OF IT'S COMPNENTS FOR LESS ANYWHERE.  THIS KIT IS WORTH OVER $3,200.00 NEW.

Located in Grand Blanc, MI. 48439

Thanks for looking,
Anthony

[GOT ROCKS]

New Price

[TechJeeper]

I assume this kit is used, correct?

[94_xj_country]

how is this kit for an xj or a zj? xj's are leaf sprung in the rear  ::poke::

[GOT ROCKS]

how is this kit for an xj or a zj? xj's are leaf sprung in the rear  ::poke::

I guess reading is a past time.  Not trying to be smart.  But in the reply above your reply it states, & I quote:

"You will need to fabricate new brackets for the rear four link. As it is custom."

"As it is custom" is also a big statement.

As well as if you go to the ebay auction (you don't need to be registered to view) it sates in there all of the part #'s.  As for the rear coil spring conversion I have the perches for the axles and unibody for the XJ. (they are just not pictured because I don't know what the buyer has in mind.

I hope this has cleared up any misunderstanding there may have been on your part.

Thanks for looking.

[jeepfan1974]

wow i guess we shouldnt ask any questions

[ouchman]

a friend is interested, but would like pics of the actual kit, how he's getting it, not a new one


     thanx....Doug

[GOT ROCKS]

a friend is interested, but would like pics of the actual kit, how he's getting it, not a new one


     thanx....Doug

The picture in the post IS of the actual lift kit just with a white background and all put into one picture instead of 5 different ones.

I can email you the 5 or 6 original pictures on my dining room table sitting on the blue blanket before I changed the background and put them all into one picture if you would like.  Just PM me your email address and I will get them right out to you.

Look forward to hearing from you soon & thanks for looking.

Anthony

[GOT ROCKS]

wow i guess we shouldnt ask any questions

How do I put this delicately?!?!?!

Well lets just say you ask any question you want.  But please read the details first.  Since everyone doesn't have ebay I will be posting the details shortly.

I am sorry if I scared you off.

Thanks for looking.

Anthony

[GOT ROCKS]

LOWER PRICE