Jeep Cherokee 1999 Blower Motor Resistor Location

[naypalm]

Underneath the dash on the passenger side, you will see a metal plate with a wire clip and 4 wires leading out... (it's shape is sort of a cross between elliptical and diamond) remove the wire clip and you see 4 metal tabs. Remove the 2 bolts and the resistor is attached to the other side of the plate.

You must first remove the glove compartment to see the resistor, then
loosen 1 bolt facing rear of glove box and remove 2 verticle bolts in cover
to the left of kick panel where fuse box is located. This will give enough room to reach the resistor if hands aren't too big. When resistor has been removed it may have debris packed around it, which caused it to burn out, if so duct work may have to be cleaned out of leaves or mouse nest.


Found at: http://wiki.answers.com/Q/Where_is_the_ ... z16tMCKtDm