Messages

I am with Nosilla with the linkage. When I put pull my lever to fast or just a hair to far back, my transfer case makes the sounds you have mentioned.

Who's Jimmy Buffett?

Will there be car crushing envolved??  lol

Someone is selling there hardtop on ORJ for $800 and it's a one piece, so I guess $500 for a 2 piece isn't to bad as long as it doesn't leak

What area do you live in?  Just about any truck stop you find off the highway will carry CB's

I was planning on going to the Spring Fling this weekend, but I have to many friends out of work and having a hard time making ends meet, so all my extra cash for my wheeling trips have now been diverted to keep food on the table for my friends... going to be a long summer : (

If you are going to be at our next meeting, you are more the welcome to take a look at my set up on my XJ to give you an idea what needs to be done

I believe I saw somewhere about some place that makes extensions so that you can use your stock shocks. You can also modify the rear shock brackets on the rear axle so that you can use the stock shocks. For a t-case drop, you can either get a drop t-case cross member from Rustys, they run about $100 or a cheap route is to use a stack of washers between the frame and the cross member. I might even have some t-case drop extensions somewhere around my garage. As for break lines, the only one you will need to replace is the rear main line that runs from the frame to the axle. The front lines can be relocated to get you extra length.

As for death wobble, the only real thing you need to worry about that is the front track bar. You can either buy an adjustable one or you can relocate the stock one by moving it about 3/4"

If you want a cheap lift for it, you  can use F150 springs from the junk yard for the front and you can use S10 or Dakota springs for the rear. It will get you about 3.5" of lift , but will be a bit stiff of a ride.

Very nice

I have a low-maileage self propelled mower in the garage.  Used it one and a half seasons, then bought the rider.  Hasn't been stared in a while.  $50?  It's a Craftsman.

Sounds like a good deal.. I'll take

I had a  lawn mower in storage for about 5 years, took it out and started up on the 2nd pull.

Rent-a-mower service.

Goto wally world, buy one, take it back after a month and say it sucks and get ur money back. repeat monthly. :lol:

lol  Now I like that idea

Thought about doing that, but it is also a crapshoot on what you are getting at a yard sale and the amount of time driving around trying to find one in addition to the gas you waste. I know a place in Howel that sells strictly used lawn mowers, but was hopeing to find something local

I have tried search the adds in the paper, but didn't find much of anything

push mower

Anyone know of any place in the Flint area other then the local Pawn shops that sells used lawn mowers?

Thanks